Decimator MC-DMON-Quad 4-Channel 3G-SDI Multiviewer for OpenGear Platforms

1 to 4 Channel (3G/HD/SD)-SDI MultiViewer with Custom Layouts Supports 3G level A and B on inputs and output, allowing conversion between 3G level A and B Low cost miniature (3G/HD/SD)-SDI 1 to 4 MultiViewer or 4 to 1 input multiplexer Custom Layouts with various standard layouts 16 Character UMD overlay per window with individual enables, custom positioning and size 8 Channel Audio Metering overlay per window with individual enables, custom positioning and size Audio ID overlay 3 pin connector on the DR1-10B1G rear module allows for Dynamic UMD and Tallies via RS422/485 using the industry standard TSL protocol Tallies can be applied to either Tally Boxes (Default) or Border Tally boxes allows for up to 4 Tallies per window Fast switching between inputs using Full-Screen scaling Selectable output format in both Full-Screen MultiViewer mode Low latency buffering for each input allowing non-synchronous inputs 4x (3G/HD/SD)-SDI inputs with auto detection (29 Formats supported in total) Each quadrant is independent of the others, allowing any 3G/HD/SD format of any frame rate to be displayed simultaneously Variable aspect ratios per quadrant In Pass-Through mode the selected input is passed through to both the (3G/HD/SD)-SDI outputs USB Mini B port for control and firmware updates Supports openGear DashBoard for control The DR1-10B1G rear is sold separately and h

• Inputs: 4x 3G-SDI 1x mini-USB type-B for control and updates1x 3-pin connector for UMD and Tallies via RS-422/485
• Outputs: 1x 3G-SDI
• SDI: 3G-SDI (SMPTE 424M)Data rate: 2.97; 2.967Gb/sResolutions: 1080p: 60; 59.94; 50HzHD-SDI (SMPTE 292M/274M/296M)Data rate: 1.485; 1.435Gb/sResolutions: 1080i: 60; 59.94; 50Hz 1080p/psf: 30; 29.97; 25; 24; 23.98Hz 720p: 60; 59.94; 50; 30; 29.97; 25; 24; 23.98Hz SD-SDI (SMPTE 259M)Data rate: 270Mb/sResolutions: 625i50 (PAL); 525i59.94 (NTSC)
• Status Indication: 1x Power / Update 4x Signal lock and rate
• Power: TBA